ERC AND ERC-HD WIRE CONDUIT

ERC & ERC-HD CONDUIT:
The ERC (Extended Reach Conduit) and ERC-HD (Heavy-Duty) Conduits are both designed for extended run lengths. They resist wear and reduce feed pressure due to their limited bending. Ideal for stationary applications, they will not stretch or compress, and are electrically insulated.

ERC Conduit:
 Recommended for delivery of solid welding electrodes up to 3/32"(2.4mm) diameter or cored wires up to 5/64" (2.0mm). To maintain quality performance, it is not recommended to bend ERC Conduit to less than a 12" (30.5cm) radius. Flexing of the conduit should be limited.

ERC-HD Conduit:
 Recommended for delivery of solid welding electrodes up to 1/8" (3.2mm) diameter, or cored wires up to 7/64" (2.8mm). To maintain quality performance, it is not recommended to bend ERC-HD Conduit to less than a 18" (45.7cm) radius.

 

  

                 

SPECIFICATIONS

ECR - .312"(7.9mm) I.D., .625"(15.9mm) O.D

ECR-HD - .357"(9.0mm) I.D., .750"(19.1mm) O.D

FLAT WIRE MONOCOIL CORE - The flat wire monocoil core is precision wound from long-lasting, high carbon, hardened steel spring wire for a longer, productive life. Manufactured to larger I.D. clearances which is especially useful in reducing wire drag.

POLYETHYLENE INSULATING JACKET - The thick wall extruded polyethylene jacket reinforces the wire monocoil while limiting bending and resisting "snaking" conditions caused by electrode cast. Superior wire transfer is accomplished due to this reinforcement over long distances with minimal bends.

HOW TO ORDER

LENGTH

ECR PART NUMBER

ECR-HD PART NUMBER

100' (30.48m)

A-2048-100

A-2049-100

250' (76.20m)

A-2048-250

A-2049-250

500' 304.80m)

A-2048-500

A-2049-500

OPTIONS:
     
 
  Strain Relief (Uninstalled) Strain Relief (installed)
 
 
Add a Strain Relief and QCI Insulator:
  
 

A Strain Relief reinforces heavily flexed areas of the conduit and terminations where repetitive flexing may be an issue. Strain Relief may be factory installed or added during your installation and is available in a 1-3/32” (27.7mm) I.D. x 12” (0.3m) and 48” (1.21m) lengths.

  
 
 
QCI Insulator (uninstalled)
 
Slide the QCI Insulator over any exposed metal connection to reduce the possibility of short circuits and shock hazards.
     

  ERC & ERC-HD CATALOG SHEET

  CONDUIT CONNECTOR SELECTION/ FLOW CHART

  CONNECTOR/ADAPTOR

  CONDUIT TECHNICAL INFORMATION

  WIRE FEEDER CROSS REFERENCE

 

 

Hand Held Torches | Smoke Extraction Torch | Robotic Torches | Automatic Torches | HRT Contact Tips/Consumables | ArcSafe/MultiClutch | Nozzle Cleaning Stations

 Nozzle Reaming Blades | Nozzle Conditioner/Anti Spatter | Wire Conduit/Accessories | Tungsten Grinders | Literature | Press Releases | Careers | Links | Contact Us | Home